Accelerated Care Plus 1203000C, Руководство пользователя

Страница: 15 / 37

12 OMNISOUND
®
3000C PRO USER MANUAL
COPYRIGHT © 2001 - 2017, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED
Transducer Controls / Operation
The Omnisound
®
3000C Pro transducers are available in two sizes, 2 cm 2 and 5 cm 2 . Each transducer may be
operated at 1 or 3 MHz operating frequencies, which control the depth of penetration. A unique feature of
Omnisound
®
3000C Pro transducers is the fully adjustable transducer angle. To adjust transducer angle hold the
transducer in one hand while adjusting the transducer head to the desired position. The transducer should not be
stressed when it reaches the end of its movement range to avoid damage of the rotary joint. ACP transducers are
fully waterproof and may be used with underwater techniques. It is recommended that the handle is held by the
operator without direct contact to the water, to avoid exposure.
The Omnisound
®
3000C Pro transducer contains a complete workstation which allows you to set output directly on
the transducer handle. The power up and down arrows allow setting of the power or intensity of the ultrasound
beam. The timer starts when the power up arrow is released from a zero output starting position. The timer stops
(holds) when the output is reset to zero with the power down arrow. This can be used if you are interrupted during
treatment and you wish to maintain initial treatment time. A continuous tone will be heard while adjusting output
power up or down.
NOTE: Output power is automatically decreased to zero upon frequency change.
OMNISOUND
®
3000C PRO TRANSDUCER