Acceed IP101, Руководство по установке и инструкция пользователя

Страница: 7 / 17

3
2. The right panel lists all installed virtual COM ports, as well as their COM name, IP address, TCP port, flow
control mode and status.
3. Double click on any virtual COM will bring up its configuration window.
4. Make changes on
IP Address , TCP Port , Flow Control as you want, then click OK . (Note: the change to the
COM name here is not valid. To change COM name, please see the following Configuring Virtual COM section).
5. A message Configuration finished! pops up, click OK to return.
2.1.3.3 Searching IP SERIAL SERVER
1. Click on Searching IP SERIAL SERVER from the IP SERIAL SERVER pull down menu or double click the
Searching IP SERIAL SERVER icon.
2. After searching, the right panel lists all servers connected to the network, as well as their server name, IP address,
TCP port, mapped to any virtual COM or not, and status.
3. Double click on any server, if a password is set for the server, a password window will display first to ask for
permission, then bring up the properties window which displays the mutual properties such as server name, serial
number and IP address on the left, while the properties for each port such as port number, protocol and baud rate
are displayed on the right.
4. To change the server properties, input new value in each field, then click Update . The new settings will take effect
after restarting the device. If the server has more than one ports, select a different port from Serial port pull down
list, its properties are displayed accordingly.
2.1.3.4 Uninstall Virtual COM
1. First select a virtual COM on the right panel when it displays installed virtual COM ports.
2. Click on
Uninstall Virtual COM from the IP SERIAL SERVER pull down menu or double click the Uninstall
Virtual COM icon.
3. The next window asks your confirmation to uninstall the COM, click OK to continue uninstalling.
4. The next window shows uninstalling progress, when it disappears, the virtual COM is uninstalled.
2.1.4 Configuring Virtual COM using Device Manager
There are two ways to configure virtual COM. The first method is described above in
IP SERVER DEVICE Manager .
The second method is by using Device Manager .
1. Go to Control Panel , double click System will bring up System Properties window.
2. Select Hardware tab, then click Device Manager...
3. On Device Manager window, click the plus sign to the left of Ports (COM & LPT) .
4. Double click Virtual Serial Port (COMx) to open the Properties window.
5. Click Configuration , its COM name, IP address, TCP port and flow control mode are displayed, you can make
changes on them.
6. Click OK will save your changes.
2.1.5 Uninstalling Virtual COM using Device Manager
There are two ways to uninstall virtual COM. The first method is described above in IP SERIAL SERVER Manager . The
second method is by using Device Manager .
1. Go to Control Panel , double click System will bring up System Properties window.
2. Select Hardware tab, then click Device Manager...
3. On Device Manager window, click the plus sign to the left of Ports (COM & LPT) .
4. Right click Virtual Serial Port (COMx) , and click Uninstall… .
5. The next window asks your confirmation to uninstall the COM, click OK to continue uninstalling.
2.2 Windows NT
2.2.1 Installing Driver and Software
1. Put the installation CD into your PC, go to Windows NT directory and run setup.exe.
2. If you are first time to do the installation, the InstallShield will bring up the Welcome to the InstallShield
Wizard for IP SERIAL DEVICE window, click Next to continue.
3. The InstallShield will copy files to appropriate folder and all other work, and finish that by InstallShield Wizard
Complete window.
4. Click Finish to complete the installation.
5. If you already ran the installation before, the InstallShield will bring up the Welcome Modify, repair, or remove
the program window.
6. Chooes an option to modify, repair or remove installed components, then click Next to continue.