Acceed IP101, Руководство по установке и инструкция пользователя

Страница: 13 / 17

9
4 Troubleshooting
Q: Why sometimes Hyperterminal loses characters or display funny characters?
A: This happens when you open a new Hyperterminal connection and keep inputting the same character. The reason is
before Hyperterminal receiving two different characters from the other end, its status is
Auto detect , and your port settings
haven’t fully take effect, so the transferred data is not predicable. To solve this problem, input two different characters
from the other end, then the Hyperterminal status will show your port settings such as 9600 8-N-1, save this Hyperterminal
connection. Next you open your saved Hyperterminal connection, everything will be fine.
Q: What should I do when I forget the IP address or baud rate setting of an IP SERIAL SERVER?
A: You can use the default setting mode by setting switch to on-off-on and using a null modem to connect a PC to IP
SERIAL SERVER. The default serial port setting is 9600 8-N-1. Or you can use the searching capability to get the
information of all IP SERIAL SERVER on the network. Double clicks on the searched result will show the detail
configuration parameters of the device.
Q: Why I cannot open virtual COMx?
A: The server settings and virtual COMx settings may not match, please make sure their IP address,
protocol, port and flow control mode are the same, and the remote IP address should be the host IP
address.