Acceed IP101, Руководство по установке и инструкция пользователя

Страница: 10 / 17

6
2.3.3.2 Virtual COM Configuration
1. Click on Virtual COM Configuration from the IP SERIAL SERVER pull down menu or double click the
Virtual COM Configuration icon.
2. The right panel lists all installed virtual COM ports, as well as their COM name, IP address, TCP port, flow
control mode and status.
3. Double click on any virtual COM will bring up its configuration window.
4. Make changes on
Map To , IP Address , TCP Port , Flow Control, as you want, then click OK .
5. A message Configuration finished! pops up, click OK to return.
2.3.3.3 Searching IP SERIAL SERVER
1. Click on Searching IP SERIAL SERVER from the IP SERIAL SERVER pull down menu or double click the
Searching IP SERIAL SERVER icon.
2. After searching, the right panel lists all servers connected to the network, as well as their server name, IP address,
TCP port, mapped to any virtual COM or not, and status.
3. Double click on any server, if a password is set for the server, a password window will display first to ask for
permission, then bring up the properties window which displays the mutual properties such as server name, serial
number and IP address on the left, while the properties for each port such as port number, protocol and baud rate
are displayed on the right.
4. To change the server properties, input new value in each field, then click Update . The new settings will take effect
after restarting the device. If the server has more than one ports, select a different port from Serial port pull down
list, its properties are displayed accordingly.
2.3.3.4 Uninstall Virtual COM
To uninstall virtual COM port on Windows 98, you will be asked to use device manager to do that.
1. First select a virtual COM on the right panel when it displays installed virtual COM ports.
2. Click on
Uninstall Virtual COM from the IP SERIAL SERVER pull down menu or double click the Uninstall
Virtual COM icon.
3. The next window will ask you go to Device Manager to uninstall the COM, see the following Uninstalling
Virtual COM section for details.
4. Click OK to return.
2.3.4 Configuring Virtual COM Using Device Manager
There are two ways to configure virtual COM. The first method is described above in
IP SERVER DEVICE Manager .
The second method is by using Device Manager .
1. Go to Control Panel , double click System will bring up System Properties window.
2. Select Device Manager tab.
3. On Device Manager window, click the plus sign to the left of Ports (COM & LPT) .
4. Double click Virtual Serial Port (COMx) to open the Properties window.
5. Click Port Settings , its COM name, IP address, TCP port and flow control mode are displayed, you can make
changes on them.
6. Click OK will save your changes.
2.3.5 Uninstalling Virtual COM Using Device Manager
The installed virtual COM can be uninstalled by using Device Manager .
1. Go to Control Panel , double click System will bring up System Properties window.
2. Select Device Manager tab.
3. On Device Manager window, click the plus sign to the left of Ports (COM & LPT) .
4. Right click Virtual Serial Port (COMx) , and click Remove .
5. The next window asks your confirmation to uninstall the COM, click OK to continue uninstalling.