Protected Options
Warning : Changing any of the Protected options may
be dangerous and can result in injury. It can also
damage the spa and it's equipment as well. Changes
made by user are at the his/her own risk. All liability
rests with the person doing the changes. Only trained
service personnel should make changes. If unsure
please contact ACC for more information.
P1 0 = There is no additional circulating pump. The primary
pump is usually 2 speed. The low speed is the filtering
and heating pump
1 = A circulating pump is attached to the system.
P2 0 = The primary pump is a 2 speed pump.
1 = The primary pump is a single speed pump.
Note : The circulating pump is always attached thru the
heater. All filtration and heating is done with the
circulating pump when one is attached to the system.
P3 0 = The system has high amps available.
1 = The system is only capable of 20 or 30 amps, (low power).
In this mode the heater can only operate with the low or
circulation pump. It is disabled with all other selections.
P4 0 = The LITE key operates as an On/Off switch. The light relay
and the accessory relay (if installed) operate together.
1 = The LITE key is a 3 function key:
♦
Press once, the spa light is turned on
♦
Press again, both spa light on and accessory go on
♦
Press a third itme for both functions to go off
P5 0 = Reserved. Do not use this option.
P6 0 = Air blower is enabled. The AIR key is active.
1 = Air blower is disabled. The AIR key is deactivated.
Page 19
