• You can charge the battery by plugging the USB cable into any
of the power supplies listed below:
• A computer
• A USB wall-charger with an output of 5 volts and 1 amp
• A DC car-charger with an output of 5 volts and 1 amp
• It takes about 1-2 hours to fully charge the battery from
empty. Try not to let the battery completely run out before
charging. Charge as needed.
• To check remaining battery level, see below for Battery Level
Indicator.
• When powering off the scale, the Battery Level Indicator can be seen on the top of the
display.
• You can also check the battery level in the main settings menu. When the scale is powered
off, press and hold the Power button, the LED display will show [ ACAIA ] and then changes
to [ SEt ]. Continue holding the Power button until the battery percentage is displayed.
• You can also check the battery level by connecting the scale to Acaia Apps.
Product Care Information
Turn on the Acaia
scale.
Turn on scale
Make sure the scale
is in weighing mode
and the unit is set to
‘gram’, then tap the
‘T’ button rapidly.
Tap T button
Keep tapping the ‘T’
button until ‘CAL’ is
shown on the
display.
See CAL display
Place a weight
on the scale and wait
until the display
shows ‘_End_’.
Calibration is now
complete!
Place a weight
Battery Charge
Calibration
5
Battery Level Indicator
When powering off
When accessing settings
Note: You may also use 500 g, 1000 g or 2000 g weights. If you use weights other than Acaia
Weights, we recommend standard F2 class weights.
