AC STAG-4 QBOX BASIC, Руководство пользователя, Страница: 23 / 65

AC S.A. all rights reserved. Under penalty of law and/or liability claims it is forbidden to copy, publish, distribute, make available and/or use in any way all or any part of information contained
within this document, in particular photographs, drawings, illustrations, trademarks, etc
23
2.2. AC STAG version
After the diagnostic application startup, the version info is presented on its top bar;
the examples (figure 13-16) present version 0.21.2 / 0.23.5.
2.3. Main menu
The main menu consists of the following options:

Port
– options may be used to select a COM port, set-up the communication link,
terminate communication with the controller

Window
– options may be used to open program screens (such as: oscilloscope,
monitor parameters, monitor autoadaptation, reader OBD, digital recorder ) if they
have been closed

Language
– options may be used to select user interface language version

Tools
–
option may be used to update hardware devices, setup program settings,
load store settings , store modified settings , restore default (factory) settings

Help
– options may be used to display info on the program/the controller and
documentation (including this manual).
To bring up the About gas ECU window, select “Gas controller info” in the Help menu”.
Fig. 17 Gas controller info window.
The Gas controller info window (Fig. 17) shows the following parameters:
ECU working time:

Fuel
–
working time of the controller using petrol listed in the following format: H
–
hours, M
– minutes, S – seconds.

Since last connection
–
working time of the controller using petrol since its last
connection with a PC.

Gas
– total working time of the controller using LPG.

Since last connection
– working time of the controller using LPG since its last
connection with a PC.