AC Schnitzer AC S II, Инструкция по монтажу

Страница: 14 / 44

14
F i t t i n g I n s t r u c t i o n s
AC Schnitzer Hand Lever AC S II
2. Fitting
-- Clean, inspect and lightly grease components.
On vehicles BEFORE / UP TO MY 2011, remove
standard rotary adjuster by twisting off the
threaded piece.
(Fig. 7)
On vehicles AFTER MY 2011, use the threaded
insert 420-47812-41 ordered separately.
- Clean standard threaded piece, grease lightly
and screw into the AC Schnitzer brake lever. Clip
plastic rotary adjuster back onto threaded piece,
as per standard.
(Vehicles up to 2011)
- On vehicles after 2011, lightly grease the
separately ordered pressure piece and screw fully
into the AC Schnitzer brake lever supplied as
shown. (Fig. 8)
- Refit the remaining components (push rod and
compression spring) to the AC Schnitzer brake
lever in the reverse order from removal, as
shown, and fix using the standard bush. Lightly
grease ball on push-rod. (Fig. 9)
Fitting Instructions Hand Lever Type AC S 2 / Issue: 01 / 2017 RVo_REV_1
AC Schnitzer - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -300 Fax -135 / www.ac-schnitzer.de