AC Infinity Advance Grow Tent Kit, Руководство пользователя

Страница: 104 / 128

104
TRANSITION TEMPERATURE SETTING
Adjusts how gradually your device will
shift between levels when triggered ON
by the AUTO Mode’s temperature trigger.
This will determine how much the probe
temperature needs to increase to step up
to the next level setting.
The higher the transition setting is, the
wider the temperature gap is between
levels. The lower the transition setting
is, the smaller the temperature gap is
between levels. If this figure is set to zero,
your device will jump to your maximum
level when triggered ON.
Press the up or down button to set a
transition threshold between 0°F and
20°F (0°C and 10°C). When the sensor
temperature first reaches or crosses the
temperature trigger point, the level will
increase by one (exiting OFF Mode).
Each time the threshold level is crossed,
the level will ramp up by one until it
reaches the level set in ON Mode.
EXAMPLE
In this example, your high temperature
trigger is set at 80°F, the OFF Mode level
is 0, and the ON Mode level is 6. If the
transition threshold is set to 0°F, then
once the sensor temperature reaches or
exceeds 80°F, the devices will trigger to
run at level 6. However, if the transition
threshold is set to 2°F, then the devices
will trigger to run at level 1 when the
temperature reaches or exceeds 80°F.
It will then ramp up to level 2 when the
temperature reaches or exceeds 82°F,
level 3 at 84°F, etc. From 90°F on, it will
run at level 6, the level set in ON Mode.
PROGRAMMING
CONTROLLER 69 PRO