AC Infinity Advance Grow Tent Kit, Руководство пользователя

Страница: 105 / 128

105
TRANSITION HUMIDITY SETTING
Adjusts how gradually your device will
shift between levels when triggered ON
by the AUTO Mode’s humidity trigger.
This will determine how much the probe
humidity needs to increase to step up to
the next level setting.
The higher the transition setting is, the
wider the humidity gap is between levels.
The lower the transition setting is, the
smaller the humidity gap is between
levels. If this figure is set to zero, your
device will jump to your maximum level
when triggered ON.
Press the up or down button to set a
transition threshold between 0% and
10%. When the sensor humidity first
reaches or crosses the humidity trigger
point, the level will increase by one
(exiting OFF Mode). Each time the
threshold level is crossed, the level will
ramp up by one until it reaches the level
set in ON Mode.
EXAMPLE
In this example, your high humidity
trigger is set at 70%, the OFF Mode level
is 0, and the ON Mode level is 6. If the
transition threshold is set to 0%, once the
sensor humidity reaches or exceeds 70%
then the devices will trigger to run at level
7. However, if the transition threshold is
set to 2%, then the devices will trigger to
run at level 1 when it reaches or exceeds
70%. It will then step up to level 2 when
reaching or exceeding 72%, level 3 at
74%, etc. From 80% on, it will run at level
6, the level set in ON Mode.
PROGRAMMING
CONTROLLER 69 PRO