16
7. Remove the adjustment pins and push the front side of cradle until it is touching
the tire and re-install the pins. If the pins cannot be installed while the front side is
touching the tire, move the front side of cradle away from the tire until the pin can be
inserted into the next closest hole. You do not want this to be too tight on the tire.
Do
not force the adjustment pins in.
8. Release the latch using the radio and back the tug out from under the plane. Drive
the tug back under the tire to check that the wheel cradle is set up correctly and to
ensure the cradle is latching securely. When releasing the latch always make sure
the wheel is against the back gate. If not, the latch may not release properly.
Adjustment Pins
Push this side up
towards the tire
Cradle Back Gate
