13
1. Components
2-3 Adjusting the Wheel Cradle
2. Start Up Guide
1. When towing a non-fairing aircraft the front and back cradle gates should be adjusted
in the fully extended position. For aircraft with fairings, adjust the cradle gates to the
lowest setting. If in the lowest setting and extra clearance is needed, position the
Booster Plate
on the center of the maplate between the tire guide spacers.
2. To adjust the front gate remove the fl at head screws from each side and slide the
right and left ramp blocks to the desired position. Then reinstall the fl at head screws
on each side. Note: It may be easier to remove these screws with the link locking
pins removed.
Ramp Blocks
Flat Head Screw
Flat Head Screw
Link Locking Pins
Booster Plate
