Abus TVVR70020, Руководство пользователя

Страница: 8 / 44

Important safety information
8
Important safety information
Explanation of symbols
The following symbols are used in this manual and on the
device:
Symbol Signal word Meaning
Warning Indicates a risk of injury or
health hazards.
Warning Indicates a risk of injury or
health hazards caused by
electrical voltage.
Important Indicates possible damage to
the device/accessories.
Note Indicates important information.
The following labels are used in the text:
Meaning
1. …
2. …
Set of tasks or instructions with a defined
sequence in the text
•
…
•
…
Set of points or warnings without a defined
sequence in the text
Proper use
Only use the device for the purpose which it was
designed and built for. Any other use is considered
inappropriate.
This device may only be used for the following
purpose(s):
•
The 16-channel NAS is used in combination with
connected video signal sources (IP cameras) for
property surveillance purposes.
Note
Data storage is subject to national data-protection
guidelines.
During installation, inform your customers
regarding the existence of these guidelines.
General information
Before using the device for the first time, read the
following instructions carefully and pay attention to all
warnings, even if you are already familiar with electronic
devices.
Warning
All guarantee claims become invalid for damages
caused by non-compliance with these operating
instructions.
We cannot be held liable for resulting damages.
Warning
We cannot be held liable in the event of material
or personal damage caused by improper
operation or non-compliance with the safety
information.
All guarantee claims are invalid in such cases.
Keep this manual in a safe place for future reference.
If you pass on or sell the device, you must also include
this user manual.
This device has been manufactured in accordance with
international safety standards.
Power supply
•
Only operate this device through a power source
which supplies the mains power specified on the type
plate.
•
If you are unsure of the power supply at the
installation location, contact your power supply
company.
Warning
Avoid data loss!
Always use an uninterruptible power supply (UPS)
with overvoltage protection.
•
Disconnect the device from the mains power supply
before carrying out maintenance or installation work.
•
To disconnect the device completely from the mains
power supply, the plug must be disconnected from
the mains socket. Therefore, the device should be
positioned so that direct and unobstructed access to
the mains socket is guaranteed at all times and the
plug can be disconnected immediately in an
emergency.