Settings - Configuration
129
TAB Handling
Define the response in the case of an alarm:
Parameter
Setting
Full Screen
Monitoring
A message appears on the monitor.
Audible Warning The device emits a repeating tone.
Notify Surveil-
lance Center
Sends an alarm signal to a PC with
ABUS CMS software. The software
must be enabled and the recorder
set to surveillance mode on the PC.
Send E-Mail
An e-mail is sent to a specific e-mail
address (see page 124).
Trigger Alarm
Output
see also page
Fehler! Textmarke
nicht definiert.
Confirm the settings by clicking
Apply
and leave the
menu with
OK
.
TAB PTZ Linking
Currently no functioning.
Alarm output
1.
Select an alarm output to be configured in the
drop-
down menu under “Alarm Output No.”.
2.
Assign any name to the alarm
output in “Alarm
Name”.
3.
In “Dwell Time”, select how long the alarm is trig-
gered for.
4.
In “Handling”, select the schedule for the alarm
output.
5.
Click
Copy
to apply these settings for other alarm
outputs.
6.
Confirm the settings by clicking
Apply
and leave
the menu with
OK
.
Note
To record with the aid of an alarm, you must set
up the schedule under
Recording
(see p. 135).
