English
10.3.2.8. NAT
Enable Port Mapping
This enables Universal Plug and Play port forwarding for network services. If your router supports
UPnP, using this option means that port forwarding is enabled automatically.
Port Mapping Mode
Select here whether you wish to conduct port mapping automatically or manually.
Protocol Name:
HTTP
The default port for HTTP transmission is 80. As an alternative, this port can be assigned a value in
the range 1025 ~ 65535. If several IP cameras are located on the same subnetwork, each camera
should have its own unique HTTP port.
RTSP
The default port for RTSP transmission is 554. As an alternative, this port can be assigned a value in
the range 1025 ~ 65535. If several IP cameras are located on the same subnetwork, each camera
should have its own unique RTSP port.
Server Port (control port)
The standard port for SDK transmission is 8000. Communication port for internal data. As an
alternative, this port can be assigned a value in the range 1025 ~ 65535. If several IP cameras are
located in the same subnetwork, each camera should have its own unique server port.
External Port
You can only change ports manually here if the "Port Mapping Mode" was set to manual.
External IP Address
Display the external IP address for mobile access.
Status
Displays whether the external port entered is valid or not valid.
111