Abus TV7602, Руководство по установке

Страница: 66 / 203

66
B. RS-485 Termination
The 1
st
DIP of SW2 is used for 100 Ω termination.
Set on 1
st
DIP of SW2 only by the last connected camera from the loop (CAM n).
Even in case of only one camera, set ON 1
st
-DIP of SW2.
C. Protocol
The 3
rd
, 4
TH
of DIP SW2 above are used for Protocol Setting.
Factory Default: Pelco-D or Pelco-P (Auto detection)
DIP SW2 - 3
rd
4
th
OFF / OFF Pelco-D or Pelco-P
ON / ON Maxpro protocol
D. Baud Rate Setting
The 7
th
, 8
th
SW of DIP SW2 is used for Baud Rate setting.
With DIP SW2 Baud Rate can be changed to 4800bps, 9600bps.
Factory Default: 2400bps.
DIP SW2-7
th
DIP SW2-8
th
BAUD RATE
OFF OFF Not Used
OFF ON 2400bps
ON OFF
4800bps
ON ON 9600bps
* The 2
nd
, 5
th
, 6
th
of DIP SW2 are not used.