Abus SECURITY-CENTER ECOLINE TV7090, Руководство по установке

Страница: 45 / 96

21
Connecting PELCO-keyboard (KBD200A/KBD300A)
Connect the RS-422 serial port (terminal TX +) from the control keyboard, to the Speed Dome Camera RS-
485 serial port (terminal D +). And connect the RS-422 serial port (terminal TX -) from the control
keyboard, to the Speed Dome Camera RS-485 serial port (terminal D -).
Normal Display Mode
Speed Dome Function PELCO Keyboard
Focus Near NEAR
Focus Far FAR
Iris + OPEN
Iris - CLOSE
Pan Left Move Joystick Left
Pan Right Move Joystick Right
Tilt Up Move Joystick Up
Tilt Down Move Joystick Down
Zoom Tele Twist Joystick clockwise
Zoom Wide Twist Joystick counterclockwise
OSD Setup Menu Mode
Speed Dome Function PELCO Keyboard
Cursor Up NEAR
Cursor Down FAR
Menu Enter OPEN
Menu Exit CLOSE
Decrease (-) Move Joystick Left
Increase (+) Move Joystick Right
None Move Joystick Up
None Move Joystick Down
None Twist Joystick clockwise
None Twist Joystick counterclockwise
Speed Dome Function PELCO Keyboard Operation
Accessing Main Menu
Enter 95; Hold the PRESET key (approximately five
seconds) until the main menu appears on the screen.
Call up the Preset Points
Enter preset number (1~32, 35~82) and press
PRESET to put camera in preset position.
Setting the Preset Points
To program, position camera, enter desired preset
number (1~32,35~82), and hold down PRESET for
two seconds.
AUTO SCAN Enter 99 and press PRESET
STOP SCAN Enter 96 and press PRESET
Call up Preset AUTO PAN Enter group number (1~6) and press PATTERN
Stop Preset AUTO PAN Press ACK
Please refer to PELCO Keyboard (KBD200A/ KBD300A) manual for more information.