Abus KEYGARAGE One, Руководство по эксплуатации

Страница: 19 / 89

36 37
USA-required information regarding pro-
ducts with FCC certification and SDoC
Contains Transmitter Module FCC ID:
XPYANNAB1
Changes or modifications not expressly
damage that has been caused by external
influences (e.g. transport, external forces),
improper use, normal wear and tear or
non-compliance with this operating and
installation instructions document. If a
warranty claim is asserted, the product
must be returned with the original receipt
with date of purchase and a brief written
description of the fault.
Subject to technical alterations. No
liability for mistakes and printing errors.
Licence texts
The Bluetooth ® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
ABUS is under license. Other trademarks
and trade names are those of their
respective owners.
Apple and the Apple logo are trademarks
of Apple Inc., registered in the U.S. and
other countries and regions. App Store is a
service mark of Apple Inc.
Google Play and the Google Play logo are
trademarks of Google LLC.
approved by the party responsible for
compliance could void the user‘s authori-
ty to operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interfe-
rence to radio communications. However,
there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interferen-
ce to radio or television reception, which
can be determined by turning the equip-
ment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.