Abus IPCS82500, Руководство пользователя

Страница: 109 / 119

109
7.5.8.2 Cover Detection
Enable Cover Detection:
This function detects if an area within the live image is covered.
Preview Area:
Preview and configuration area.
Draw Area: Draw here an area which shall be monitored by tamper detection.
Procedure: Press to start -> draw area with left mouse button ->
press again to stop drawing.
Delete: Delete the area.
Sensitivity: Change the sensitivity of the detection (3 levels).
7.5.8.3 Video Loss detection
Enable video loss monitoring:
To enable the feature, enable this check-box. This function
can e.g. be used in the Alarm Manager to trigger an event.
7.5.8.4 Alarm input
Alarm Input No.:
Select the alarm input you want to configure (Amount depends
on camera model).
Alarm Name:
Enter a name as description.
Alarm Type:
Defines the non-operating and trigger state.
NO: Normally Open (Normal state open)
NC: Normally Closed (Normal state closed)
7.5.8.5 Alarm output
Alarm Output:
Select the alarm output you want to configure (Amount depends
on camera model).
Alarm Name:
Enter a name as description.
Delay:
Select the duration of switching the alarm output in case of an
event.
Manual: the output is only switched for the time of the event.