Abus IPCS82500, Руководство пользователя

Страница: 106 / 119

106
start-up of this patrol step. Add further patrol steps as
required. When you are finished, press the disk symbol to
save the whole patrol. The playback symbol starts the patrol.
The stop symbol stops the patrol.
Tab: Pattern:
A pattern is a programmed control and zoom sequence. Here,
the camera stores all actions carried out by you using the
control and zoom keys. The configuration (learning phase) is
started by pressing the pencil symbol. The learning phase is
stopped by pressing the key to the right of the pencil symbol.
7.5.7.3 Limits
Setting to limit the pan and tilt (not zoom) area, e.g. to ensure that private areas are not viewed
Enable limitation:
Enable the function.
Type of limitation:
Manual stops: limit manual control.
Search stops: limit scan actions.
Type status:
Display whether a limitation has been set.
Set:
Clicking on this will initiate the process for setting the limitation
(see preview, one after the other: left, right, upper, lower
limitation, iris/ap button for saving)
Delete:
Delete all limitations.
7.5.7.4 Starting position
Note: the starting positon must be saved as any preset in advance.
Setting for the starting position of the PTZ Dome after restarting
Set:
Set the current position as the starting position.
Delete:
Delete the current starting position.
Go to:
Retrieve a preset (preset position).
7.5.7.5 Park action
Function for performing a certain action after a defined amount of time (5–720 seconds)
Enable park action:
Enable the function.
Park time:
This is the amount of time that must pass after manual PTZ control before
the park action function can be re-enabled (5–720 seconds).