Introduction
14
On-screen keyboard
If you click with the mouse in a text input field, the on-
screen keyboard appears:
For simple figure input, the following on-screen keyboard
appears:
The keys have exactly the same function as a computer
keyboard.
To input a figure, click on it with the left mouse key.
To finish the entry, click on
Enter
.
To delete the figure in front of the cursor, click on
.
To switch between upper and lower case text, click
on the framed
a
. The active setting is indicated above
the keyboard.
To cancel an entry, or to leave the field, click on ESC.
Starting the device
Attention
The device may only be connected to a mains
voltage supply as specified on the type plate.
For security, use an uninterruptable power supply
UPS.
When the device is connected to the power supply, it
starts up automatically and the LED status bar glows.
1. During the start-up procedure, the device carries out
a self-test.
2. Finally, the setup wizard appears. End this, to go to
live view.
Switching off the device, locking, rebooting
In the main menu, click on Shutdown. The overview
appears.
1. To switch off, select the
Shutdown
option and
confirm the query with
Yes
. The device is switched
off.
Do not press any key during the switch off
procedure.
Now pull out the plug of the power supply unit.
2. To lock the system, select the left hand symbol
Logout
. The user interface is locked. To reach the
menu, a password must be entered.
3. To reboot, select the right hand symbol
Reboot
. The
device carries out a reboot.
Switching on the device
Plug in the power supply unit to start the device.