Abus CITADEL Alarm Set Micral, Инструкция по монтажу и эксплуатации

Страница: 24 / 68

24
GB
If the battery voltage is lower than 2,4 V, in the process of pushing the
button, the LED (11) will flash continuosly to prompt for replacement of
the battery.
Replace a discharged battery immediately. Only use batteries of
type CR2032. When inserting the battery, please pay attention to the
correct polarity!
To change battery, open the housing carefully with a screwdriver at
the arrow-marked points, as shown below:
SOS
Power supply DC 3 V CR2032
Standby current < 1 µA
Transmitter current < 20 mA
Radio frequency 868 MHz
Transmitted power < 13 dBm
Working temperature -10°C - +55°C
Tecnical data