Abus CITADEL Alarm Set Micral, Инструкция по монтажу и эксплуатации

Страница: 23 / 68

23
Wireless remote control
SOS
LED (11)
Emergency button (12)
Activate (13)
Deactivate (14)
+
(inserted)
GB
Configuring the remote control(s)
1. Configuring the remote control to the alarm central
Press the MOD key (3) for 3 seconds - until the caution light flashes.
The alarm central enters into study status. Pull out the insulation film
from the battery compartment. Press one of the keys on the remote
control: code is transmitted. The caution light slowly flashes 3 times
to confirm this. If you attempt to re-learn an already taught-in remote
control, a warning tone sounds.
2. Activate the alarm central
Press Activate key (13) to activate the alarm central. Caution light flas-
hes for 60 sec. (alarm delay) and one beep sounds. After 60 sec. a
double beep will sound and the alarm central enters into alarm state.
Caution light flashes approx. every 2 seconds. During the alarm delay
you could press Deactivate key (14) to exit alarm mode and alarm
central is switched off.
Instructions for use / battery replacement
1. Press Activate key (13) or Deactivate key (14) to switch the alarm
central on and off
.
2. By pressing the emergency button (12) you can manually trigger an
alarm, e.g. in the event of a burglary attack. Attention: depending on
the selected volume control, the alam sounds with up to 110 dbA!