ABTronic SPORT-ELEC MULTISPORTPRO, Руководство пользователя

Страница: 13 / 54

EN
CT
CS
JA
13
- USER MANUAL
GUIDANCE AND MANUFACTURER’S DECLARATION –
ELECTROMAGNETIC EMISSIONS
The Multisport PRO is intended for use in the electromagnetic environment specified below. The customer or the user of the Multisport PRO should
assure that it is used in such an environment.
EMISSIONS COMPLIANCE ELECTROMAGNETIC ENVIRONMENT - GUIDANCE
RF emissions
CISPR 11
Group 1
The Multisport PRO uses RF energy only for its internal function. Therefore, its
RF emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
The Multisport PRO is suitable for use in all establishments, including domestic
establishments and those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations/ flicker
emissions
IEC 61000-3-3
Not applicable
GUIDANCE AND MANUFACTURER’S DECLARATION
ELECTROMAGNETIC IMMUNITY
The Multisport PRO is intended for use in the electromagnetic environment specified below. The customer or the user of the Multisport PRO should
assure that it is used in such an environment.
IMMUNITY TEST IEC 60601 TEST LEVEL COMPLIANCE LEVEL
ELECTROMAGNETIC ENVIRONMENT -
GUIDANCE
Electrostatic
discharge (ESD) IEC
61000-4-2
±6 kV contact
±8 kV air
±6 kV contact
±8 kV air
Floors should be wood, concrete or ceramic tile. If
floors are covered with synthetic material, the relative
humidity should be at least 30 %.
Electrical fast
transient/burst IEC
61000-4-4
±2 kV for power supply lines ±2 kV for power supply
Mains power quality should be that of a typical
commercial or hospital environment.
Surge
IEC 61000-4-5
±1 kV line(s) and neutral ±1 kV line(s) and neutral
Voltage dips, short
interruptions and
voltage variations
on power supply
input lines
IEC 61000-4-11
<5 % UT (>95 % dip in UT)
for 0,5 cycle
<5 % UT (>95 % dip in UT)
for 0,5 cycle
Mains power quality should be that of a typical
commercial or hospital environment. If a dips or an
interruption of mains power occurs, the
current of the Multisport PRO may be dropped
off from normal level, it may be necessary to use
uninterruptible power supply or a battery
40 % UT (60 % dip in UT)
for 5 cycles
40 % UT (60 % dip in UT)
for 5 cycles
70 % UT (30 % dip in UT)
for 25 cycles
70 % UT (30 % dip in UT)
for 25 cycles
<5 % UT (>95 % dip in UT)
for 5s
<5 % UT (>95 % dip in UT)
for 5s
Power frequency
(50/60 Hz) magnetic
field IEC 61000-4-8
3 A/m 3A/m
Power frequency magnetic fields should be at
levels characteristic of a typical location in a typical
commercial or hospital environment.
NOTE - UT is the a.c. mains voltage prior to application of the test level