Page 4
Features of the unit
All the units have the same plugs and indicator lights, though they are in
different positions on the different units. The main ones are:
1.
DMX output socket (pin 3 cold, pin 2 hot, pin 1 grounded). Other DMX
devices can be linked in to the system through this socket. (If you can’t tell
which is which, the output is the one where you can’t touch the pins.)
2.
DMX input plug (pin 3 cold, pin 2 hot, pin 1 screen). Used to connect the
unit to either a DMX controller or to another Abstract unit in stand-alone
mode. You can use a dedicated controller such as the Abstract CE controller,
or another DMX lighting desk. If you are using a controller with a 5-pin DMX
output, you will need to use a 5 to 3 pin adaptor with pins 2 and 3 swapped.
3.
Power on light (red). This light should be on whenever the unit is powered
up. If it doesn’t come on there is either no power to the unit, or some internal
problem with the unit.
4.
DMX present / Audio beat light (green). This light is on constantly when
DMX is being received (it may flicker a bit). When it is not lit, the unit is in
stand alone mode and the light will flash when an audio beat is detected.
5.
Dip switches. Dip switches 1-9 set the DMX channel that the unit will respond
to (in binary code) when a DMX controller is being used. Switch 10 sets the
stand alone ‘group’ of the unit when in stand-alone mode, either 1 (off) or 2
(on). See the last page of this booklet for help on setting the switches.
1
2
3 4
5
6
Содержание ClubColour
Страница 1: ...Instruction Manual ...
Страница 2: ...Page 2 ...
