manualshive.com logo in svg

ABSTRACT ClubColour, Инструкция по эксплуатации

Поделиться
Скачать
ABSTRACT ClubColour Скачать руководство пользователя страница 12

Page 12

Shutter
The Galactic Star, Futurescan 1, Gladiator Revolution, MoonRay, MoonScan and
ColourFlood have a separate channel to control blackout and strobe functions.

On all units except the Galactic Star, these functions are actually provided by the
colour/gobo wheel, so you may see colours momentarily flash by when you
select blackout. The strobe function operates on adjacent colours. If you want a
black/white strobe, select “White” on the colour channel.

The 

Galactic Star has  a separate shutter. Channel 1 must be set to a non-zero

value before any light will come out of the unit.

Compatibility with other Abstract units

All units in the Abstract CE, VR and Club ranges are compatible with each
other, even those which have different functions, or more colours and gobos.
You will find that some colours are repeated on the simpler units; these match
the extra colours or gobos on the more complex units.

Содержание ClubColour





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды