Absolent Air Care Filtermist FX Series, Руководство пользователя и журнал учета

Страница: 7 / 36

7
The following are typical installations and cover the majority of applications. For more advice on these or other
installation methods please contact (01952 290500).
Always try to position the extraction point as far as practically possible from the cutting area of the machine and
so that mist is drawn away from the operator’s working area.
Direct Mount To Machine Tool - Vertical
WARNING! Always ensure that the machine can support the weight of the unit (see table 1 on page 12)
. ) t i n u h t i w d e i l p p u s ( s d u t s e s a c x 4 t i F ) 2 ( . t i n u f o e s a b n i s w e r c s t r e s n i x 4 e v o m e R ) 1 (
(3) Fit foam collar seal around inlet spigot
(supplied with unit). (4) Cut extraction hole in machine enclosure.
(5) Drill 4 x case stud fixing holes (see table
on page 12 for hole size and case stud hole
PCD). (6) Cut hole for oil return tube (if required).
(7) Fit oil return tube and position tube to
drain oil back to machine enclosure, sump
or collection vessel. (8) Position unit and secure.
IMPORTANT!
There must be no kinks or ‘U’ bends in the return tube. The end of the tube must not be submerged.
Installation Methods