Absolent Air Care Filtermist FX Series, Руководство пользователя и журнал учета

Страница: 11 / 36

11
Electrical Connection
Filtermist FX series and S Series motors are wound for low & high voltage and operate on 50Hz & 60Hz as shown
in the table below. A connection diagram can be found inside the motor terminal box.
NOTE: Motor terminal connections will be configured for the motor to run at High voltage unless Low voltage
connection is specified at the time of ordering.
The motors must be connected via a 3-phase, direct-on-line starter and isolator with suitable thermal overloads
or via an independent supply in the machine control panel.
On start-up the motor will draw current in excess of that shown on the motor plate. Ensure that appropriate
fuses are used.
IMPORTANT! The unit must run in the direction indicated by the arrow on the upper section and must run
continuously. To change rotation, swap any two supply wires. It must not be wired to switch on and off with the
machine cycle.
Recommended overload settings and terminal connection. Overloads
to be set no higher than 125% of the motors full load
current.
IMPORTANT! Please note that for 230/240v, 50HZ applications, special motors are required. For more
information, contact your supplier
IMPORTANT! FX7002 must only be used with 50HZ supply. Do not use on 60HZ APPLICATIONS
L1 L2 L3
U2 W2 V2
V1 U1 W1
0.18kw (6 pin)
L1 L2 L3
U2 W2 V2
V1 W1
0.18kw (6 pin)
U1
L1 L2 L3
W2 V2 U2
V5 W5 U5
V1 W1 U1
L1
L2
L3
W2 V2 U2
V5 W5 U5
V1 W1 U1
Electrical Connection
Low Voltage Settings
LOW
VOLTAGE
recommended overload settings
200v 220v 230v
50hz 60hz 50hz 60hz 60hz
0.18kw FLC 1.02 1.02 1.02 1.02 1.02
0.55kw FLC 2.7 2.6 2.7 2.6 2.6
1.1kw FLC 4.4 4.6 4.4 4.6 4.6
1.5kw FLC 6.3 6.3 6.3 6.3 6.3
2.2kw FLC 8.8 9.4 8.8 9.4 9.4
High Voltage Settings
HIGH
VOLTAGE
recommended overload settings
380v 400v 440v 460v 480v 575v
50hz 50hz 60hz 60hz 60hz 60hz
0.18kw FLC *
0.55kw FLC 1.35 1.35 1.3 1.3 1.3 *
1.1kw FLC 2.2 2.2 2.3 2.3 2.3 *
1.5kw FLC 3.15 3.15 3.15 3.15 3.15 *
2.2kw* FLC 4.4 4.4 4.7 4.7 4.7 *