background image

4

EN/US/CA/A.mist A.mistT/UM-2239-1

Subject to alteration without prior notice.

SAFETY PRECAUTIONS

4

Type of warning

Warning text

Warning - Hazardous voltage!

The filter unit works with a high electrical voltage. The electrical installation 

must be performed by qualified electricians. Disconnect the power supply to 

the filter unit before it is opened and/or before starting work on the filter unit.

Warning - Do not connect the filter unit to explosive gases! 

Do not connect the filter unit to processing machines that can bring about an 

explosion risk. Furthermore, the filter unit must not be connected to media 

that are highly inflammable without preventative measures being taken to stop 

the spread of the explosion or fire to the filter unit. 

Caution - Read and understand the user’s manual!

Read and understand the user guide before working on the filter unit.

Caution - Qualified personnel only!

All work concerning transport, installation and maintenance must be perfor-

med by qualified personnel.

Risk of trapping injury!

Do not insert your hand into the filter unit when the fan is running. Do not 

wear loosely hanging clothing near the fan when operational. These can be 

sucked into the fan or get caught.

Risk of tipping over!

Always check the weight of the filter unit (technical data, heading 7) before 

lifting. When equipped with an integrated fan unit the centre of gravity of the 

filter unit is relatively high. When transporting the filter unit, secure well - an 

alternative can be to transport the filter unit horizontally.

Heavy products!

Filter cassettes are heavy. Check the current weight of the filter cassette be

-

fore handling. Weight details can be found on the filter cassette’s rating plate 

and under heading 11 “Handling the filter cassettes”.

Lifting equipment or the like must be used during service and inspection 

work above the ground.

Risk of slipping!

Keep the floor clean. Remove oil spill to prevent injury due to slipping.

High noise levels!

If the sound level at the control panel/workplace exceeds 75 dB(A) ear protec

-

tion must be worn.

Dangerous fluids!

Use requisite personal safety equipment with all types of service work, as the 

filter unit can contain liquids dangerous to health. Refer to the product sheet 

for the liquids in question before handling. 

Caution when recirculating air back into the building!

Note that in its standard design the filter unit does not separate gas molecules.

Danger

Skilled 

personnel

Risk of 

personal injury

Содержание A-mist6C





























Отзывы: