2.4GHz FHSS technology, 6 channels frequency-hopping spread spectrum, highly resistant to anti-jamming.
Receiver response time is 3ms, ensuring a fast response and better control.
Smooth and highly sensitive to control inputs and stable at distances 400-500m
Compatible with a variety of vehicles; suitalbe for RC cars, RC boats and RC tanks...etc.
With brake and fail safe out of control protection function.
Each 3 channels can be set respectively, supporting mixed control for 1 and 2 channels.
Voltage range of transmitter: 4.8V - 12V (support 1s-3s battery), automatic identification of voltage,
low voltage warning on 7.4V/4.8V
Voltage range of receiver: 3.3V-10V, working current 30mA, supports high voltage servo.
Unique throttle speed limit adjustment function, allows beginners to practive at a safe speed.
Channel 5 and 6 press for lock and press for release, function specially for Crawler accessories.
FEATURES:
CHANNEL FUNCTION:
CH1: Reverse for steering
CH1: Sub-trim for steering
CH1: EPA for steering
CH2: Reverse for throttle
CH2: Sub-trim for throttle
CH2: EPA for throttle
Channel 5
Channel 6
Antenna
Channel 1 (Steering)
Channel 2 (Throttle)
Channel 3
Battery case
Channel 4
Power
On / Off
Simulator/
PPM interface
USB Connection
(only for up to 5V MAX.)
BASIC OPERATION:
Battery installation:
1. Open the battery compartment cover.
2. Insert 4 x ”AA” batteries or 2S Li-Po batteries
with correct polarity. (No response if batterypolarity reversed)
3. Put back battery compartment cover
The battery socket is equipped with
anti-reverse insertion function,
wrong polarity connecton will not
damage the transmitter.
2S Li-Po rechargable battery pack
Binding process:
1. Power on Transmitter
2. Power on Receiver and press button on side of receiver,
LED indicator fast flashing means entering into
binding mode, the receiver will automatically
searching for the nearest transmitter signal for
Binding.
3 . The indicator will always ON after
successful bound.
Binding button
Rope
