ABSCO HIGHLANDER SHED
MODEL: 60303HK
5.96mW x 3.00mD x 2.30mH
Model: 60303HK
29/11/2021
1.4
37
Absco Industries
Assembly Instruction Manual
ROOF CONSTRUCTION
X4
D
D
D
STEP 1.
Slide the roof panels into position and
secure with only one screw in each
corner at this stage.
STEP 2.
Secure ridge beam to
gable sections with two
screws at either end.
STEP 3.
After the roof panels have
been secured, fit two gable
braces (13A) form the top
wall channel to the underside
of the ridge beam at 45
degrees as shown to both
gable walls
STEP 4.
Secure each ridge beam to
ech ridge plate with 4x 16mm
self drilling tek screws.
INSIDE VIEW
INSIDE VIEW
2 X GABLE
BRACE
(13A)
NOTE: This symbol
denotes that holes to be pre-
drilled with a 3mm drill bit
before fastening.
D
- WARNING -
Do not climb on or walk
on the roof.
