ABSCO HIGHLANDER SHED
MODEL: 60303HK
5.96mW x 3.00mD x 2.30mH
Model: 60303HK
29/11/2021
1.4
18
Absco Industries
Assembly Instruction Manual
To make the total span we must now join sections of sheeting together for the roof and wall.
Refer to the panel construction section of this instruction set for further details and ensure that the
assembled panels are not joined together with pre-punched holes incorrectly positioned.
The overall length of each panel is the same as the ridge beam.
Trim the channels by 16.5mm to
allow the sheets to be overlapped.
Overlap the panels and fasten as
shown.
16.5
16.5
It is not critical that the overall dimension is exact but try and make sure the length is within 5mm.
JOINING WALL AND ROOF PANELS
Ridge beam and panel length = 2993mm
Length to be cut off = 16.5mm
New length = 2976.5mm
Both panels joined = 2976.5 x 2 =
5953mm
