ABSCO HIGHLANDER SHED
MODEL: 60303HK
5.96mW x 3.00mD x 2.30mH
Model: 60303HK
29/11/2021
1.4
13
Absco Industries
Assembly Instruction Manual
97A
97A
5953mm Overall length
97A
97A
97A
To make the total span we must now join the two ridge beams
.
Using a hacksaw, remove one protruding section of each
ridge beam, this will allow the sections to butt up neatly
to each other.
Cut away these two only.
.
.
.
98A
Insert the ZARSP at an equal distance
into each ridge beam. Confirm that
the beam is straight with a string line
before fastening with self drilling
screws.
The ZARSP is a very tight fit, tap into
place with a hammer.
ZARSP
JOINING RIDGE BEAMS
98A
ZARSP
Push
Finished
Joined Ridge Beams
Hex Hd Self-drilling tek screw
with neoprene washer
Hex Driver Bit
