ABSCO SHEDS ADGAZEBO63, Руководство пользователя

Страница: 8 / 14

Absco Industries Assembly Instruction Manual
ABSCO SIGNATURE GAZEBO
MODEL: ADGAZEBO63
6.12m W x 3.11m D x 2.60m H
Model: ADGAZEBO63 4/12/23 1.00 8
3. On the middle rib, fasten panel to low side
beam with a tek 14 x 125 mm FAST104.
Don’t over-tighten and crush the panel.
For further screw position detail see Fastening
layout below.
4. Check for consistent overhang along end beam
- adjust if required.
Fasten with a tek 14 x 125 mm FAST104 at the
midpoint of side beam - in the sheet pan.
5. On the middle rib , fasten to front beam with
another tek 14 x 125 mm FAST104 .
Fixed panel
A. Overlap rib
B. Press here
Complete
Next panel
‘Bottom skin’ male &
female features align
FRONT VIEW - Laying the roof panels
ROOF PANELS
Front
Rear
4
3
5
Side beam
TOP VIEW - Fastening layout
6.
Fasten roof panels to beams with
a tek 14 x 125 mm FAST104 at the
remaining positions .
NOTE: rib fixed to centreline of beam
unless noted otherwise.
NOTE: 3 , 4 & 5 are the screws done
earlier.
Don’t over tighten and crush the panel.
7.
Use shorter tek screws with neoprene
washers FAST101 at the locations
marked with ‘x’ where the ‘top skins’
overlap.
3
5
4
x
x
x
x
x
x
x
x
x
x
First
panel
Last
panel