ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16
Absco Highlander Shed
Model: 3060HK
INSTRUCTIONS
AND VIDEOS
PAGE 16
ABSCO ASSEMBLY INTRODUCTION
FASTENING SYMBOLS
The snap-tite assembly system locks most perimeter channels to all roof and wall
sheets without the need for tools and fasteners.
To pre-assemble the four wall panels
and two roof panels, the perimeter
channels are secured to the top and
bottom of each panel using the
snaptite system, as detailed on the
following pages wherever you see
the symbol.
Position sheets on timbers,
trestles or partly over edge of
concrete slab.
Each perimeter channel must finish flush with the
edges of the sheets. the snap-tite system allows
adjustment for this process by simply tapping the
channel along the sheets until each end is neatly flush.
If you need to remove channels from the panels, pull
the channel along the panel from opposing ends. You
may need someone to help with this.
Join components together with one screw at this
location only, as some channel sections have extra
holes that are not required for this model of garden
shed
Do not join components together at this location yet,
as the screw may obstruct further assembly of other
components
4mm NUT & BOLT SET
3mm POP RIVETS
PUSH
PUSH
HIGH SIDE
HIGH SIDE
PUSH
HIGH SIDE
HIGH SIDE
After joining sheets together, position channel over one end of the sheets, gently
tapping it over the snaptite lugs, working along the sheets to the other end.
HIGH SIDE
SNAP
T TE
i
SNAP
T TE
i
SNAPT TE
i
Join components together by pre-drilling the holes
first. Use one component as a template to mark where
the holes are. Drill with 3mm drill bit.
D
SELF DRILLING TEK SCREW
FOR JOINING FRONT AND
CENTRE FRAME COMPONENTS
