ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: 3060HK 04/07/16
Absco Highlander Shed
Model: 3060HK
INSTRUCTIONS
AND VIDEOS
PAGE 28
FIT ONE 100mm CHANNEL SECTION (C0100) TO BOX THE BASE
OF EACH OUTSIDE LEG AS SHOWN. THESE WILL LATER BE
USED FOR SECURING THE FRAME TO THE CONCRETE SLAB.
SECURE THE SMALL
TRIANGULAR PLATE TO
THE EXTERIOR SIDE OF
THE FRAME.
SECURE THE RIDGE
PLATE TO THE
INTERIOR SIDE OF
THE FRAME.
40mm ALL SECTIONS
LAYOUT ALL SECTIONS
AS SHOWN IN THE
SAME MANNER AS THE
PORTAL FRAME.
NOTE: IF YOU HAVE AN EDGE REBATE IN YOUR CONCRETE SLAB, YOU WILL HAVE TO CUT AN
AMOUNT OFF THE BOTTOM OF THE FRAME LEGS EQUAL TO THE DEPTH OF THE REBATE.
USE 16mm SELF DRILLING SCREWS JOIN ALL
COMPONENTS TOGETHER WITH THREE SCREWS
AT ALL CONNECTING POINTS ON BOTH SIDES OF
THE FRAME.
325
2300
325
100
380
2295
2000
380
380
380
8. HIGHLANDER HIGH-FRONT
FRAME ASSEMBLY
(SHEET 2 of 2)
