Absaar AB-MJS400, Руководство по эксплуатации

Страница: 9 / 16

Operating instructions
ABSAAR
9
4) DESCRIPTION AND INDICATIONS OF THE LEDS
Description
and indication
of the "Power"
power supply
button
Indicator of the
charge status of
the internal battery
Press the power supply button
(5)
, the LED indicator
(4)
indicates the charge status of
the internal battery. When charging, the LEDs light up and flash one after the other
until fully charged. This is indicated when all the LEDs are lit.
Description
of the charge
status levels
when recharging
the internal
battery of the
Mini Jumpstarter
The LEDs
(4)
indicate the charge status of the internal battery in relation to the
voltage of the internal battery
0%-25%
LED N
o
.1 flashes
25%-50% LED N
o
.1 und No.2 flash
50%-75% LED N
o
.1, N
o
.2 und No.3 flash
75%-99% LED N
o
. 1, N
o
.2, No.3 und No.4 flash
100 % (end of charging process) All the LEDs are lit continuously.
Description
of the charge
statuses when
recharging
the internal
battery of the
Mini Jumpstarter
Press the power supply button
(5)
, the LED indicator
(4)
indicates the charge status
of the internal battery and automatically switches itself off after 30 seconds if no
charge is detected.
100%-75%
All the LEDs are lit.
75%-50% LED N
o
. 1, N
o
. 2 and N
o
. 3 are lit
50%-25% LED N
o
. 1 and N
o
. 2 are lit
25%-1% LED N
o
. 1 is lit
1%- 0% LED N
o
. 1 flashes
0% All the LEDs are off
Others
Torch LED
lighting
(1)
1- Click the "power" power supply button
(5)
for more than 3 seconds to light the torch
(1)
2- Click again to activate the S.O.S. mode
3- Click again to activate the stroboscopic mode
4- Click again (or double click) to switch off the torch
(1)
.
The torch
(1)
cannot be switched on when charging the battery or when the LEDs
(4)
indicate that the internal battery's power is weak.
5) PROCEDURE FOR USING THE START-UP AID
• Ensure that the MJS-400 is fully charged
• Connect the red clamp with the positive and the black clamp with negative pole of the battery
• Insert the jump leads into the outlet (9)
• Start the car (The attempt is only allowed to last 5 seconds, after each attempt you have to wait 60 seconds to cool down the
internal battery)
• Remove the jump leads out of the outlet (9)
• Disconnect the clamps from the battery
• Recharge the MJS-400