![background image](http://html.mh-extra.com/html/abs/100/100_installation-and-operating-instructions-manual_453183005.webp)
������������ ���� ���������� ������������
5
ABS lifting station Piranhamat
ABS lifting station Piranhamat
1..
N�m������
L�������
11
14-00
Type
Pump type
Nr./SN
Item No./Serial No.
xx/xxxx Production date (Week/Year)
UN
Rated Voltage
V
IN
Rated Current
A
Frequency
Hz
P1N
Rated Input Power
kW
n
Speed
min-1
Qmax
Max. Flow
m3/h
Hmax
Max. Head
m
IP 44
Protection type
Figure 3 Nameplate
1.3
C�mm�����y �� �h� ������ ������������ D�N ���� EN ��v������ �h� ��� �f ��f����� ��������
f�� �h� ��m����� �f ��w���� ����������� f����� m�����
Automatic lifting stations are required if the normal water level in the odor lock of the effluent source lies under
the sewer backwash level.
In the case of installations of this size and design of the Piranhamat 100/120, only a single WC, one wash-hand
basin, one bidet and one shower tray may be connected. The direct or indirect connection of other effluent
sources is not allowed. In addition another WC must be available above the sewer backwash level. If more
effluent sources are present then we recommend our series Sanimat.
ATTENTION
The regulations of DIN 1986/100 EN 12050 and 12056 should be observed!
1.4
A����������
The Piranhamat 100/120 lifting unit is supplied as standard with the following fittings:
Non-return valve (flap type)
Hose clamp (x2)
Rubber cap
Fixing screw (x2)
Dowel floor fixing (x2)
Ground fixing (2)
* The version with part No. 07560320/07565092 has an additional seal with built-in non-return valve.
T��������
m
During transport the unit should not be dropped or thrown.
c
The unit should never be raised or lowered by the Power cable.
All relevant safety regulators as well as general good technical practice must be complied with.
-
-
-
-
-
-
-