AbodeFit Zen Molight Far, Руководство пользователя

Страница: 13 / 16

EN
13
Troubleshooting
Power Indicator
Light is not
working
The connectors are not
connected properly
No power supply input
The Power Indicator Light
is faulty
Check the connections
Check the power outlet on the
wall, the power plug is connected
properly & the power switch is on
Contact our Customer Service
Centre, details on the last page
Heat Indicator
Light is not
working
The Heat Indicator Light or
circuit board is faulty
The temperature sensor is
faulty
Contact our Customer Service
Centre, details on the last page
Contact our Customer Service
Centre, details on the last page
The carbon
far-infrared
heaters are not
heating up
The carbon far-infrared
heaters are faulty
The wire junction or the
heater’s wire is loose
The temperature sensor is
faulty
The circuit board is
damaged
Contact our Customer Service
Centre, details on the last page
Check and tighten connection
Contact our Customer Service
Centre, details on the last page
Contact our Customer Service
Centre, details on the last page
Light bulb is not
working
The light bulb has burnt out
Light bulb wiring is loose
The electrical control panel
is faulty
Replace the light bulb
Tighten light bulb connectors
Contact our Customer Service
Centre, details on the last page
Sauna does not
power up when
you press the
Power On Button
Power cord is unplugged
Power outlet has no power
Power supply or circuit
panel is faulty
Connect power plug correctly
Check power outlet
Contact our Customer Service
Centre, details on the last page
The Temperature
Display Screen
shows “EP”
The temperature sensor
connector is loose or the
sensor is faulty
Tighten the temperature sensor
connector or contact our
Customer Service Centre, details
on the last page
The Temperature
Display Screen
shows “H”
The temperature inside the
sauna is too high
Turn off sauna and please contact
our Customer Service Centre,
details on the last page
LED Lighting is
not working
LED’s have burnt out
Light wiring is loose
LED lighting holder is broken
The electrical control panel
is faulty
Replace the LED light
Tighten light connectors
Replace the LED lighting holder
Contact our Customer Service
Centre, details on the last page