AbodeFit WalkSlim 410, Руководство пользователя

Страница: 8 / 16

EN
8
Using your Walkslim 410
STARTING THE WALKSLIM 410 USING THE REMOTE CONTROL
Pair the remote control and the WalkSlim 410 as follows:
1. Press the Start/Pause button on the remote control and aim the remote at the LED
display screen on the base of the Treadmill
2. Press the Start/Pause button on the remote control for about 3 seconds, and the
treadmill will sound “didi...”, indicating that the remote control and the treadmill have
been successfully paired. The remote control can now be used to control the treadmill .
3. Attach the power cord to the treadmill and plug into dedicated power outlet
4. Check the stability and function of the treadmill by standing on the footrail, press the
Start/Pause button on remote control.
5. The treadmill will now be on and after a 3 second countdown, with beeps to signal
each second countdown the motor will start at a speed of 1.0km/h. Press “Speed
+” and motor speed will rise to reach a speed of 2.5-3.5km/h (this is the most
comfortable speed for walking).
6. You can increase the speed of walking after a few minutes. Press the “Speed +”
button on the remote control or press the “Speed -” button to slow down.
7. In the process of movement, you can press the key“Start/Pause” button on the
remote control to make the motor stop running at any time.
POWER SAVING MODE
The WalkSlim 410 will enter power saving mode if there is no keystroke command within
10 minutes. In this standby power saving mode, the display will automatically turn off. It
can be woken up when any key is pressed.
Start/Pause
Speed