Abode APSM3001, Руководство пользователя

Страница: 7 / 19

7
Steam mop assembly
Before using your steam cleaner
Remove all packaging and lay out the separate components.
Check the steam unit after unpacking for any visual damage such as:
•
Misaligned or damaged parts
•
Damage to the main body and separate components
•
Damage to the plug or cable.
If you can see any damage do not use the steam cleaner and refer to page 15.
Insert the narrower end of the telescopic
tubing into the black plastic handle.
The pin may need to be pushed in slightly to
insert it into the handle.
Make sure the sprung pin locates in the hole
in the black plastic handle to fully secure.
Insert the assembled telescopic handle in to
the main body of the steam mop.
Make sure the sprung pin on the handle
locates in the hole in the main body.
The pin may need to be pushed in to locate
it in the body.
To alter the length of the telescopic handle,
a) Press and hold the extension lock in the
direction indicated.
b) Slide the steel pole, up or down, to the
correct length.
Hole
Pin
Pin
Hole
a)
b)