ABNOX MURALT AX-III, Инструкция по эксплуатации

Страница: 16 / 24

EN
16
Safety Warning
Read this Instruction manual through carefully in order to familiarise yourself with the
safe and efficient operation of this product. Keep this handbook for reference
purposes. This Instruction manual contains important instructions and directives for
the safe and proper operation of the product. It should also help operating and
maintenance personnel to minimise dangers, repair costs and down times and
increase the reliability and operational life of the product. For that reason it is
important to assure at all times access to this document to everyone who is assigned
with the supervision of this product.
Proper Use
The product may only be used in the operational conditions for which it is designed.
Any use that goes beyond this is deemed improper. The manufacturer is not liable for
any damages resulting from improper use. Also included in proper use are:
•
Observing and following all instructions and warnings in this Assembly
instructions.
•
Completion of inspection and maintenance work as scheduled.
Operator’s Obligations
The party responsible for the safety of the product must make sure that:
•
only qualified personnel are assigned to work with the product,
•
these persons have the Instruction manual ready to hand during all of their
work and are required to follow it consistently,
•
the rules and regulations for the prevention of accidents that apply at the site
of use are followed and that the scheduled service and maintenance is
completed on time.
Basic Safety Instructions
For the safe handling and smooth operation of this product, you must heed the
following:
•
The product may not be used for purposes for which it was not designed.
•
No modifications may be made to the product.
•
Safe operational condition must be assured at all times. On request, we will
hold a training session for the device in order to provide your personnel with
the knowledge they need.
•
All lines, hoses and screw connections need to be checked for tightness
regularly and for externally visible damage. Any damage must be immediately
repaired by technicians and if needed replaced with original parts.