Installation manual
Superbike
™
for Kawasaki Ninja H2 SX 2018-
• Revision: 00 • 13/02/2019 •
© ABM Fahrzeugtechnik GmbH
Page 6 of 8
Drain the brake fluid.
Loosen the connections of the brake- and
clutch lines from the pumps, steel lines and
the ABS module.
Mount the provided Stahlflex lines according
to the specifications of the vehicle
manufacturer.
The brake line is run and fastened directly
from the hand pump to the ABS block.
Caution: To ensure a twist-free installation,
the fittings can be aligned once.
Reconnect the armature plugs.
After the installation of the brake system, the
bracket of the reservoir must be aligned in order
to bring it into a horizontal position.
Bleed the brake and clutch according to the
manufacturer's specifications.
