Installation manual
Superbike
™
for Kawasaki Ninja H2 SX 2018-
• Revision: 00 • 13/02/2019 •
© ABM Fahrzeugtechnik GmbH
Page 5 of 8
Screw in and tighten the provided screws
into the top yokes threads.
Mount the risers with the screws (M10) and
safety washers provided to the clamps.
Tightening torque 28 Nm
Make sure that the wide side of the risers is
facing forward.
Attach both clamps.
Insert the handlebar into the risers, align and
attach lightly.
Slide the operating elements and grip armatures
onto the handlebar and provisionally pre-
assemble everything.
Tighten the clamp screws (M8).
Tightening torque 21 Nm
