Ablerex KRONOS, Инструкция по установке и эксплуатации, Страница: 58 / 72

56

All menu functions are in the table below.
Menu Sub-Menu Functions
Mimic Display
Displays the UPS status
、
alarm
、
operating mode and
measurements. Please refer to section 4-3 for more detail.
Command
(1)
Operation

Normal Mode
 ECO Mode
 Converter Mode

Shutdown
 Load on Bypass
 Cold Start Precharge Ready
Buzzer & Alarm

Enable/Disable buzzer
 Clear Latch Alarm and Buzzer
Other
 Force Charger on

Recovery Backfeed Protection Signal
 Clear UPS Maintenance Alarm
Battery Test

Battery Test.
 Turn off The Battery Test.
Monitor
Identification Displays UPS information
Real Time
Information
Displays real time measurements of input, output, bypass and
battery.
Maintenance Code Displays the maintenance code for technician to check the status of
the UPS.
Version Displays the control MCU software and firmware version.
Configuration
Alarm
Set alarm latch function.
 General Alarm
 Mains Alarm

Bypass Alarm
 Over Temperature
 Vbatt. Low

Inverter Overload
 Bypass Overload
 EPO Activated
Main
Select the measurements on the Mimic Display.
Bypass
Output