16
4 INSTALLATION
4.1 Connect Utility and Load
First, connect the UPS with Utility, then plug the loads into the Outlets on the rear of
the UPS. To use the UPS as a master “On/Off” switch, make sure that all of the loads
are switched “on”.
These UPS outlets provide battery backup and surge protection to the equipment
when Utility voltage is out of window.
Caution---
Do not connect a laser printer to the UPS outlets!
17
4.2 Connect Network Surge protection
Connect a 10 base-T / 100 base-T network cable with the RJ-45 network
surge protection “IN” jack on the rear of the UPS. Connect from the “OUT” jack
with network cabling to network equipment.
IN
O UT
4.3 Connect Computer Interface Port
Connect the supplied interface cable (RS-232 or USB, Optional) between the
interface port on the rear of the UPS and the computer interface port. See
software installation guide in the CD-ROM (Optional) for installation purpose.
