26
All of the functions are listed in the following table:
Menu
Functionality
Description
Mimic Display
This function is mainly used to display
important information such as the monitor
readings, UPS mode and alarms.
Command
The user can use this function to issue
boot,
shutdown,
and
change
mode
commands to the UPS.
Identification
Display the default system information.
Measurements
Real-time display of all monitor-readings
including input and output voltage/current,
bypass, load and battery.
Maintenance
Code
Displays the error code of the UPS to help
the
technician
quickly
diagnose
the
system problem.
Monitor
Version
Display the current software and firmware
version.
Configuration
1. Set alarm functions.
2. Set input, output and bypass display
options.
Date and Time
Set the current date and time of the UPS.
General
Backlight Delay Time.
Language
Default
language
is
English.
Other
languages can be set as default through
this function.
Setting
Update Prog.
Update the program.
Event Log
Display a detailed list of UPS events
including status, alarms and commands.
Log on Load
A graphical display of load data.
Maintenance
Key in the password “3001” to execute
Screen Calibration.
27
5.1.3.
Mimic Display
Block A (Rectifier), Block B (Bypass) and Block C (Inverter) use
to
show that a particular system block is not active or not connected;
shows that a system block is active; When
is shown then that
system block has experienced an error.
Block D, E, and F use
to show that real-time monitor readings are
not available because a particular system block is not active or not
connected.
shows that the system block is active and real-time
monitor readings are available; When
is shown then that system
block has experienced an error.
Block G shows the current battery status. When battery is not online then it
is shown as
；
When batter is charging, the progress display is green
as pictured below:
When batter is discharging, the progress display is yellow as pictured
below:
