ABLELink ABLELink MB5000 Series, Руководство пользователя

Страница: 34 / 37

User manual Version 1.0
Modbus Gateway
Port1 settings:
Configure the port parameters:
Port1 uses RS485 and should be set in the Hardware Mode option. Click after settings are
made but do not click Apply until Port2 has been configured.
After the Parameter has been configured, select the “Serial Device Mode” function menu for Port1.
Port1 “Serial Device Mode” setup
Port1 is the Modbus RTU Master device, therefore
Serial Device Mode is set to Master ,
Data Mode is set to RTU
Configure the Slave device after the Master device is configured.
There are two slave devices each providing ID1-10 services, and therefore we need two data entries for the
slave devices.