Ref: "ProgGuide1_7.docx"
Page 7 of 26
Document Revision: “1.7”
Document Date: “11 Sep. 2013”
Twenty-four (24) dot high graphics are also aligned with the top of text characters, and are
printed dot-for-bit as sent by the host. The nominal dot size is 0.125 mm square. Successive
blocks can be vertically contiguous only if Font Mode 3 is selected.
Single dot high graphics are also aligned with the top of text characters. Successive
horizontal dot lines can be vertically contiguous if no other printing is performed between
them.
Graphics may be combined with text printing as required. Large areas of solid dots are not
recommended, as they may cause overheating and shorten the head life: try shading. Heavy
graphics printing will also drain the battery more quickly.
