preparatIons, InstallatIon and takIng Into operatIon
6
Preparations, installation and taking into operation
Introducing the product
The ABL Wallbox is entirely manufactured in Germany and at all times complies with the
regulations and norms for the charging of electric vehicles applicable throughout Eu-
rope according to IEC 61851-1 Mode 3 – please also refer to the section on”Guidelines
& Norms” on page 27. According to their requirements, users may select from
model variants with SINGLE or TWIN charging sockets or SINGLE fixed charging cable,
all designed for domestic and semi-public applications.
We place the highest value on user safety in all our products. This is why the wallbox
features an internal RCCB as well as DC fault current detection: In combination with
the protection devices of the domestic electrical infrastructure and the fault current
protection of the electric vehicle, these measures ensure effective protection against
short circuit, electric shock and other operational hazards.
The wallbox is especially easy to operate during everyday use: LED lights on the front
of the wallbox housing cover allow you to check the current operating status at any
time. Should a malfunction occur, you can identify the cause by its specific LED error
code without having to open the housing. After being taken into operation by a spe-
cialist contractor, the ABL Wallbox is ready for charging at any time. For some model
variants, each charging process must be separately authorized via the integrated RFID
module, provided this function was activated during installation.
Unpacking and components included
The ABL Wallbox package includes a range of accessory components needed for in-
stallation and proper operation. Therefore, please check immediately after unpacking
(together with the customer, if required) whether the following components are in-
cluded:
Component
Quantity
Description
Wallbox
1
Charging station, consisting of plastic housing with lock-
able housing cover and separate mounting plate
Quick start guide
1
Quick start guide including safety notices in printed form
Installation kit
1
Set of fixings for wall mounting, consisting of 2 x 4
screws as well as matching wall plugs, triangular key,
strain relief including screws (2 pcs), sealing grommets
for openings at the back of the housing (3 pcs)
Should one or more components be missing after unpacking, please contact your local
ABL partner immediately.